Commercial DC Fast Charger 40 kW to 160 kW | DC EV Charger Platform | CCS1, CCS2, CHAdeMO, GB/T and NACS Options

YDCHARGE Commercial DC Fast Charger is a slim floor-mounted DC charging station designed for public charging, commercial parking, fleet depots, service areas and charging point operator projects. Available in 40 kW, 60 kW, 80 kW, 120 kW and 160 kW power configurations, it combines a 250 mm-class slim body, a wide-range 200 to 1000 V DC output platform and single-connector or dual-connector project options.

Power Configurations
40 kW, 60 kW, 80 kW, 120 kW, 160 kW
Connector Hardware
CCS1, CCS2, CHAdeMO, GB/T, NACS
Network Connectivity
OCPP 1.6J, 4G, Wi-Fi, Ethernet
Station Body & Rating
IP54 | 250 mm-Class Slim Design

The charger supports CCS1, CCS2, CHAdeMO, GB/T and NACS project configurations according to target market, connector hardware, protocol stack and validation requirements. With OCPP 1.6J, RFID, password-based access, VIN-based authorization where supported, a 7 inch color touchscreen, 4G, Wi-Fi, Ethernet, IP54 protection and OEM/ODM customization, it provides a practical commercial DC fast charging platform for public charging networks, fleet operators and equipment brands.

YDCHARGE Commercial DC Fast Charger

YDCHARGE Commercial DC Fast Charger is designed for commercial EV charging projects that require high DC charging power in a slim floor-mounted cabinet. With a 250 mm-class body design, it is suitable for sites where installation space is limited but charging performance, network operation and long-term reliability are still required.

Product Overview and Sizing Matrix

Power Allocation Flexibility

Available in 40 kW, 60 kW, 80 kW, 120 kW and 160 kW configurations, the charger supports a wide range of commercial charging applications. 40 kW and 60 kW configurations are suitable for destination charging and compact commercial sites, while 80 kW to 160 kW configurations are better suited to higher-throughput public charging, fleet depots and charging point operator projects.

1000 V DC Output Platform

The charger uses a 1000 V DC platform with a 200 to 1000 V output range, making it suitable for many modern EV platforms that require higher battery voltage support. Actual charging performance depends on selected power rating, vehicle battery voltage, charging request, connector configuration, rated cable assembly current and software control strategy.

Connector Configurations and Interface Adaptation

Dual-Connector Distribution Logic:

Single-connector and dual-connector configurations are available according to project requirements. In dual-connector configurations, power and current distribution should be configured according to charger architecture, connector type, rated cable assembly current and vehicle charging demand. This allows operators to improve charger utilization while adapting to different vehicle and site requirements.

Global Interface Connectivity Options:

Connector options can include CCS1, CCS2, CHAdeMO, GB/T and NACS according to target market and validation scope. Final connector support should be confirmed according to regional charging standards, communication protocol, vehicle compatibility, certification requirements and selected project configuration. NACS should be treated as a project option subject to technical validation and regional deployment requirements.

Commercial Network Control and Access Authorization

For commercial operation, the charger supports OCPP 1.6J for connection with compatible charging management platforms. Operators can manage charging sessions, authorization, charging records, transaction data, remote start and stop, scheduling, fault reporting, remote diagnostics and maintenance workflows through a backend system. OCPP 2.0 support can be evaluated according to project software configuration and backend compatibility.

The charger supports multiple starting and authorization modes, including local automatic charging, RFID card access, password-based access, OCPP platform authorization and VIN-based authorization where supported by project configuration.

Plug & Charge System Integration Note:

ISO 15118 based Plug & Charge should be treated as a separate project configuration that depends on vehicle compatibility, certificate handling, backend support and selected protocol stack.

Station Hardware HMI and Environmental Protections

7 Inch Local Touch Screen

A 7 inch color touchscreen provides local operation and real-time charging visibility. Users and service personnel can view charging status, voltage, current, power, charging time, fault information, temperature data and network status through the charger interface. The default screen language is English, and other languages can be customized for OEM/ODM and regional deployment projects.

IP54 Commercial Cabinets

The charger is designed for indoor and outdoor commercial environments with IP54 protection. It can be deployed in parking areas, service stations, fleet depots and other charging sites when installed according to local electrical codes, ventilation requirements, drainage conditions and site-protection rules. For harsh outdoor locations, shelter, drainage, ventilation, sunlight exposure and cable management should be evaluated during site planning.

Electrical System Safety Protection

The system can support key electrical and operational protection functions, including emergency stop, input over-voltage and under-voltage protection, output over-voltage protection, over-temperature protection, over-current protection, short-circuit protection, leakage protection, lightning protection, battery reverse protection and insulation monitoring. Final protection functions should be confirmed according to selected configuration, datasheet and certification scope.

Network Connectivity, Customization and Protocols

B2B Commercial Customization Core

The charger supports 4G, Wi-Fi and Ethernet network connection options, making it suitable for charging network operation, fleet management, commercial parking platforms and remote operation and maintenance. Remote monitoring and remote troubleshooting can help operators improve uptime, reduce unnecessary site visits and lower operating costs. YDCHARGE supports OEM and ODM customization for global commercial DC charging projects. Options include:

Power rating
Charging connector type
Single/Dual connector choice
Cable length customization
Enclosure color
Logo integration
HMI language & screen UI
RFID card functionality
Network module selection
Access & payment integration
Backend integration parameters
Market compliance layouts

Standard and Protocol Architecture

Standard and protocol support may include IEC/EN 61851-23, IEC/EN 61851-24, IEC/EN 62196, GB/T 18487, GB/T 20234, GB/T 27930, CHAdeMO protocol support, DIN 70121, ISO 15118 and OCPP, depending on selected configuration.

Final protocol support, certification scope and vehicle compatibility should be confirmed according to the selected power rating, connector type, software stack, regional market and project validation requirements.

Specify your required installation orientation, target market connection standards, and software backend constraints to coordinate with our technical deployment teams.

YDCHARGE Commercial DC Fast Charger Technical Specifications

Electrical Input and Output Specifications
Product Type Commercial DC Fast Charger
Power Rating 40 kW / 60 kW / 80 kW / 120 kW / 160 kW
Input Voltage AC 380 V ±20%
Frequency 47 to 63 Hz
Max. Input Current 74 A / 116 A / 136 A / 232 A / 272 A
Power Factor ≥0.95
Output Voltage 200 to 1000 V DC
Max. Output Current 134 A / 200 A / 266 A / 400 A / 530 A
Auxiliary Power Supply GB/T: 12 V / 24 V; CCS1 / CCS2 / CHAdeMO: 12 V
Interface, Operation and Control Parameters
Connector Configuration Single-connector / dual-connector
Current Distribution According to charger architecture, connector type and rated cable assembly current
Connector Options CCS1, CCS2, CHAdeMO, GB/T, NACS optional
Charging Cable Length 5 m default, optional length available
Input Cable Length Not included as standard
Human-Machine Interface 7 inch color touchscreen
Screen Language English by default, other languages customizable
Starting Modes Local automatic charging / RFID card / password-based access / OCPP / VIN-based authorization where supported
Environmental and Mechanical Parameters
Installation Mode Floor-mounted
Machine Size 690 × 311 × 1499 mm, excluding connector holder, handle and casters
Packing Size 1000 × 660 × 1540 mm
Packed Weight Approx. 210 kg, depending on power configuration
IP Rating IP54
Operating Environment Indoor / outdoor according to installation conditions
Operating Temperature -20°C to +50°C
Operating Humidity 5% to 90% RH, non-condensing
Operating Altitude <2000 m
Security, Network and Protocol Standards
Protection Functions Emergency stop, input over/under voltage, output over-voltage, over-temperature, over-current, short circuit, leakage, lightning protection, battery reverse protection, insulation monitoring
Standard Support IEC/EN 61851-23, IEC/EN 61851-24, IEC/EN 62196, GB/T 18487, GB/T 20234, GB/T 27930, CHAdeMO protocol support, DIN 70121, ISO 15118, depending on configuration
Backend Protocol OCPP 1.6J; OCPP 2.0 support subject to software and backend configuration
Network Connection 4G / Wi-Fi / Ethernet
OEM/ODM Supported
Specifications may vary by power rating, connector configuration, rated cable assembly current, protocol stack, software version, regional certification and project requirements. Please confirm the final datasheet before ordering.

Certification and Compliance

Available compliance configurations may include CE and other market-specific certification support according to selected model, connector type, power rating and project requirements.

Certification scope should be confirmed against the final charger configuration, test report and compliance documentation. Certificates should not be assumed to cover all power ratings, connector versions, software configurations or regional market variants unless explicitly stated in the certificate scope.

TÜV SÜD, CQC or other market-specific documentation can be provided where applicable to the selected model and market scope.

Application Scenarios

Public Charging and CPO Projects

This charger is suitable for charging point operators that require a space-efficient DC fast charging solution with OCPP connectivity, remote monitoring, authorization control and single-connector or dual-connector project options.

Commercial Parking and Destination Charging

The slim floor-mounted cabinet is suitable for shopping centers, hotels, office parks, public parking facilities and urban charging points where charging power and installation space must be balanced.

Fleet Depots and Logistics Operations

The charger can support fleet depots, logistics vehicles, commercial vans, taxis and shared mobility operators that require managed charging, backend monitoring and faster vehicle turnaround.

Highway and Service Area Charging

The charger can be deployed in highway service areas, roadside commercial charging locations and service stations where reliable DC fast charging helps reduce vehicle waiting time.

Light Commercial Vehicle and Shuttle Fleet Charging

Higher power configurations can support light commercial vehicles, shuttle fleets and medium-duty EV applications, subject to vehicle voltage, connector type, site power capacity and charging current requirements.

Airport and Ground Support Equipment

The charger can support airport ground support equipment such as baggage tractors, shuttle vehicles and service vehicles where controlled DC charging and operational uptime are important.

Commercial DC Fast Charger FAQs

B2B OEM/ODM Frequently Asked Questions

Q1. What power ratings are available?
The charger is available in 40 kW, 60 kW, 80 kW, 120 kW and 160 kW configurations. Final output capability depends on input power supply, connector type, rated cable assembly current, software configuration and vehicle charging request.
Q2. Is this charger suitable for commercial use?
Yes. It is designed for public charging, commercial parking, charging point operators, fleet depots, service areas and other managed charging environments.
Q3. Does it support single-connector and dual-connector charging?
Yes. The charger can be configured with a single-connector or dual-connector design according to project requirements. In dual-connector configurations, power and current distribution depend on charger architecture, connector type, rated cable assembly current and vehicle demand.
Q4. Which charging connectors are supported?
The charger can be configured with CCS1, CCS2, CHAdeMO, GB/T and NACS connectors according to target market and project requirements. Final compatibility depends on connector hardware, communication protocol, vehicle platform and validation scope.
Q5. Does it support NACS?
NACS can be provided as a project option. Final support should be confirmed according to connector specification, DC charging requirements, vehicle compatibility, protocol implementation and regional deployment requirements.
Q6. Does the charger support OCPP and remote operation?
Yes. OCPP 1.6J can be supported for connection with compatible charging management platforms. Through backend integration, the charger can support remote monitoring, authorization, transaction records, remote start and stop, scheduling, fault reporting and operation management. OCPP 2.0 support should be confirmed according to project software configuration and backend compatibility.
Q7. Does it support Plug & Charge?
Local automatic charging can be configured for selected applications. ISO 15118 based Plug & Charge requires project-specific configuration, vehicle compatibility, certificate handling and backend support.
Q8. What smart operation modes are available?
Depending on configuration, the charger can support local automatic charging, RFID card access, password-based access, OCPP platform authorization, VIN-based authorization where supported, remote monitoring and backend operation.
Q9. Is this charger suitable for outdoor installation?
The charger is rated IP54 and can be used in suitable indoor and outdoor environments when installed according to local electrical codes and site-protection requirements. For harsh outdoor sites, shelter, ventilation, drainage, direct sunlight and rain exposure should be considered.
Q10. What safety protections are available?
Depending on configuration, the charger can support emergency stop, input over-voltage and under-voltage protection, output over-voltage protection, over-temperature protection, over-current protection, short-circuit protection, leakage protection, lightning protection, battery reverse protection and insulation monitoring.
Q11. Can YDCHARGE provide OEM/ODM customization?
Yes. YDCHARGE supports OEM and ODM customization, including power rating, connector type, single-connector or dual-connector configuration, cable length, enclosure color, logo, HMI interface, language, RFID function, communication module, backend integration and market-specific compliance configuration.
Q12. What standards and protocols can be supported?
Depending on configuration, the charger can support IEC/EN 61851-23, IEC/EN 61851-24, IEC/EN 62196, GB/T 18487, GB/T 20234, GB/T 27930, CHAdeMO protocol support, DIN 70121, ISO 15118 and OCPP related requirements. Final support should be confirmed according to selected configuration and project validation scope.
Q13. What should be confirmed before ordering?
Before ordering, customers should confirm power rating, input power supply, single-connector or dual-connector configuration, connector type, protocol requirements, cable length, target market, installation conditions, certification scope, backend integration and vehicle compatibility.

Specify your required installation orientation, target market connection standards, and software backend constraints to coordinate with our technical deployment teams.